A.W. Chesterton
Booth 247
AAF International (AmericanAirFilter)
Booth 311
AAF International (AmericanAirFilter) has unmatched capabilities to understand complex air pollution control problems and develop effective solutions. Our complete line of equipment allows us to recommend the most efficient and economical solutions ranging from a completely packaged unit to large, complex, custom engineered systems for major air pollution control projects. AAF’s cyclones, bag collectors, cartridge collectors, wet collectors, mist collectors and side access housings can be found in thousands of installations in every industrialized country.
Abresist Kalenborn Corporation
Booth 346
ABT LLC
Booth 553
ABT LLC is a global supplier to the power generation industry. With over 25 years of manufacturing experience, we provide the highest quality products and services to our customers. Our goal is to meet the varied and complex requirements of our customers with top quality and on time deliveries.
Acuren Inspection
Booth 348/350
Acuren and Remote Access Technology (RAT), both Rockwood Companies, work together to support the mechanical integrity and inspection programs for industrial and manufacturing firms. The largest NDT provider in North America with over 3,000 employees and 90 locations, Acuren has delivered industry-leading solutions for over 30 years. RAT is the world's leading provider of industrial rope access solutions, safely placing highly trained, certified personnel at mission critical sites.
Advanced Energy Solutions
Booth 410
Advanced is one of the largest full-service specialty contractors in the Northeast. Operating through an integrated network of contracting offices across the region, we serve commercial and industrial construction customers who rely on Advanced to deliver high-quality services - cost-efficiently and safely - time and again. Highly experienced in a variety of specialized and challenging areas, Advanced is your full-service contractor for expertise in Insulation, Asbestos & Lead Abatement, Fire Protection, Hazardous Waste Remediation, Noise Control, Energy Conservation Measurements, Industrial Coatings and Specialized Fabrication Services.
Advanced Industrial Machining, Inc
Booth 555
Advanced Industrial Machining, Inc. (AIM) is a multi-service based specialty contractor. We provide our customers with a variety of services that help them get back on line when they are forced to shutdown for maintenance or unplanned outages. Our core specialties are field machining and heat treating.
Alimak Hek, Inc
Booth 352
Alimak Hek is the world leader of rack and pinion elevators, comprising the best known names in rack & pinion vertical access equipment… Alimak and Hek. Our extensive product range includes:
Permanent elevators for industrial applications
Construction elevators, material lifts and mast climbing work platforms for the construction industry
Allied Environmental Solutions, Inc.
Booth 250
Allied Environmental Solutions, Inc. specializes in providing air quality control technology for the power generation market in North America. We are a leading proprietary technology supplier to utilities, independent power producers, industrial power generators and merchant power generators. We have experience with more air quality control equipment for a broader range of applications than virtually any other company in the world.
ALSTOM Power Inc.
Booth 222/321
ALSTOM Power is a global supplier to the power industry. Primary products include utility boilers, gas turbines, Steam turbines, environmental controls and carbon capture technologies.
AMC Power / Air Monitor Corp
Booth 237
AMC Power designs and manufactures coal mass flow and airflow measurement solutions for combustion optimization and boiler diagnostics. AMC Power systems accurately and repeatably measure flow even in the most challenging application.
American Association of Boiler Assessment Inc.
Booth 428
American Chemical Technologies Inc
Booth 533
American Chemical Technologies, Inc. (ACT) manufactures and distributes biodegradable, fire-resistant, and water-soluble lubricants for Power Generation Facilities across the globe. ACT’s commitment to setting new standards for product performance and customer satisfaction will remain a keystone to our company.
American Efficiency Services Inc
Booth 114
American Efficiency Services (AES) provides guaranteed Leak Detection Services for Power Plants, Ethanol, Pharmaceutical, Food Processing, and Petrochemical Plants. Our knowledge of systems developed through inspections in hundreds of plants plus detailed and comprehensive reports have made AES the company to call when you want a “complete inspectionâ€. Additional areas of expertise and services include Condenser Tube Cleaning. Founded in 2001, the company now has offices in Maryland, Missouri and Florida to serve customers across the nation – and the world – 24 hours a day/7 days a week. If we don’t find your leak – you don’t pay! Call toll-free 877-816-9081 or visit www.AmericanEfficiency.com.
American Refractory Company
Booth 342
American Refractory Company is a union contractor out of Mt. Hope, WV. We specialize in large ash hopper or plenum duct work projects using robotic equipment for the demolition work. We do all types of refractory installation as well as coatings for areas that have corrosion or abrasion problems. We have a respected relationship with many plants within the system concerning reliability, customer service, keeping to schedule and quality of work.
Andrews Industrial Controls
Booth 548/550
Andrews Industrial Controls, Inc. has been in business since 1977 serving the industrial automation marketplace.
Our corporate mission is to service our customers by implementing best in class process automation product, engineering and business solutions. It is also our intent to pursue the highest quality in all facets of our daily business practices and to exceed customer expectations.
Anvil EPS
Booth 355
AP Services
Booth trailer 5
AP Services is a manufacturer and distributor of the highest quality fluid sealing products for the power generation
industry. AP Services provides gaskets reverse engineering, web based software to design packing systems and
highly trained technical support to improve equipment reliability at a competitive price.
APO Pumps & Compressors
Booth 443
APO Pumps & Compressors and Total Equipment Company provide Ingersoll Rand Compressed Air Systems, Goulds, Toyo, ARO, Ruhrpumpen and other leading brands of pumps along with repair services on compressors and pumps.
Applied Sensors (United Electric Controls)
Booth 448
Manufacturer of temperature and pressure instrumentation, including thermocouples, RTD temperature sensors, transmitters, and pressure and temperature switches. Our unique RTD & Thermocouple Sensor Box™ improves uptime while reducing inventory and emergencies. The One Series electronic pressure and temperature switches provide the electronic reliability of transmitters with the fast switching needed for safety/shutdown functions. Also featured: special sensor designs for bag house, heat tracing, and boiler tube applications. All made here in the USA!
Aquilex / WSI
Booth 208/210
AquilexWSI creates and implements engineered solutions for corrosion / erosion repairs in mechanical components. Solutions involve the adaptation of field-machine systems and unique methods coupled with trained personnel for cost effective maintenance repairs and component upgrades. Let us show you the value of our solutions over conventional practices.
Atlas Machine & Supply
Booth 540/542
Since 1907, thousands of industrial companies and municipalities have turned to Atlas Machine & Supply for designing, repairing, manufacturing and remanufacturing all types of complex equipment and components. Atlas provides 24/7 emergency support and also supplies a wide range of new machinery including industrial air compressors, pumps, and related products and services. Visit us at www.atlasmachine.com for more info or call 1-855-GOATLAS for service.
AVANTech, Inc.
Booth 254
AVANTech, Inc. is a comprehensive industrial water treatment solutions provider. Our extensive experience in engineering process systems enables us to create integrated solutions that can dramatically improve operations in industrial, commercial, power, and nuclear power applications.
AVANTech's approach to systems integration makes us uniquely qualified to provide turnkey service. Our broad range of services enables us to lend our expertise to an entire project, from planning through commissioning and beyond, including operational and remedial assistance needs.
B&W
Booth 234/333
The Babcock & Wilcox Company (B&W) is a leader in clean energy solutions, primarily for the fossil, nuclear and renewable power markets, as well as a premier advanced technology and mission critical defense contractor. B&W's power generation products include steam generating systems and technologies for fossil, renewable, waste-to-energy, and nuclear fuels, in addition to environmental systems, boiler auxiliary equipment and replacement parts. Integrated services include manufacturing, construction, upgrades, field engineering, and operations and maintenance.
Babcock Power
Booth 322/421
Through its various subsidiaries, Babcock Power is a leading worldwide supplier of technology, equipment and aftermarket services for heat exchangers, HRSGs, steam generators and environmental products for the power generation, industrial, biomass, solar and waste-to-energy markets.
Baker Global Technology
Booth 551
Baker Global Technology is a leading manufacturer of flue duct expansion joints for the power generation industry. Offering a complete line of elastomeric and composite expansion joints. Complete frame work assemblies and field services are also provided.
BendTec, Inc.
Booth 253
We have been in business for more than 90 years. BendTec, is a high-quality, technical steel bending and fabrication company. We fabricate power piping for New Construction & Replacement projects. Fabriction Services provided: Induction Bending pipe up to 66" O.D. up to 6" W.T., Welding to ASME Section I & VIII, B31.1., blasting, machining, painting, and NDE testing. Heat treating furnaces for normalizing and tempering of chrome bends and large assemblies.
BJ Process & Pipeline Services
Booth 339
GSB Process is the leader in providing the latest technology in valves and engineered solutions for the industrial market. We inventory the leading manufactures valves, actuators and related accessories. GSB Process provides our customers with the best solutions for their application and we size them to meet the customer's applications. We stock standard valves and accessories and can deliver within 24 hours on stocked valves and actuators.
GSB Process represents the best lines of steam products for steam applications and level measurement products in the industry along with pipe and corrosion resistant piping and equipment.
Our Primary markets are the chemical industry, power industry, refineries, coal processors, and industrial markets in West Virginia, Eastern Kentucky, Southeastern Ohio, and Western Pennsylvania.
Our 150 plus total years of employee experience in solving our customers problems and offering new products to improve productivity in the plants we work with has earned us the reputation of “being the best specialty valve supplier in the business". We are very proud of this and always put our customers first when it comes to service and on-time delivery. Our dedication to the valve and controls business has enabled us to provide solutions to most applications in the plants in our market. We continue to expand our products and expertise based on our customer's requirements and specific products that will help them improve their processes.
Bolttech Mannings
Booth 214/216
Bolttech-Mannings is a world leader in the manufature of industrial torque, tension and heat treating equipment and provider of on-site plant technical services.
BRAND
Booth 110/112
Scaffold, insulation and coatings supplier.
Brayman Construction Corporation
Booth 307
CBP Engineering Corp/Greenbank Energy
Booth 100/199
CBP Engineering is the premier supplier of abrasion resistant lined pipe, mills and material handling systems. Linings include cast basalt, alumina ceramics and silicon carbides. Greenbank Energy provides boiler enhancement through designed patented equipment to measure, monitor and balance your coal flow on the front end of the boiler. LOI monitoring for the back end.
Ceresist Inc
Booth 529
Cetek Ltd
Booth 456
Chanute Manufacturing
Booth 432
Chemtrac, Inc.
Booth 415
Chemtrac Inc. manufactures, sells, and services streaming current monitors, particle counters/monitors and turbidity meters for optimizing coagulation/filtration in water treatment. Chemtrac also provides pre-treatment optimization/filter analysis.
ChemTreat Inc
Booth 407
ChemTreat is the fastest growing water treatment company in the United States. Our mission is to provide our customers with water treatment programs and solutions that maximize system effectiveness through our unique combination of outstanding service, high-quality products, and superior technical expertise. Our goal is to forge long-term relationships for our mutual benefit.
ChemTreat, Inc., a specialty chemical company, manufactures industrial water treatment products that include influent clarification products and waste treatment polymers. The company offers cooling water and boiler water products, as well as pretreatment services, boiler water services, cooling water services, influent/effluent water services, odor control services, air stripper treatment, customer service laboratory, automation control and monitoring, and automation programs. It also provides services for pretreatment equipment selection and sizing calculations; boiler and cooling system operations and equipment troubleshooting; chemical treatment product selection and product feed calculations; chemical control, product feed, and control system instrumentation; regulatory and environmental issues; and field training and operator seminars on various aspects of water treatment. The company offers its services for industries in the automotive, cogeneration, brewery, food, electronics, glass, utility, textile, chemical and primary metals. It has operations in North America, South America, the Caribbean, and the Asia/Pacific. The company was founded in 1968 and is headquartered in Glen Allen, Virginia. As of July 2, 2007, ChemTreat, Inc. is a subsidiary of Danaher Corp.
Cleveland Valve & Gauge
Booth 223/225
Complete in-field & in-shop repair of all manufacturers valve types. Motor operator repair - Limitorque, Rotork, Teledyne... "VR " certified safety valve repair. SEPCO gaskets, packing and seals. Consolidated "Green Tag" center. Powell valve distributor. "OQ" certified pipeline technicians.
CoaLogix/SCR Tech
Booth 156/255
SCR-Tech a CoaLogix company is the leading provider of catalyst management services and regeneration technologies for selective catalytic reduction (SCR) systems used by coal & gas-fired power plants to reduce nitrogen oxides (NOx) emissions. The Company offers a wide variety of services including SCR Catalyst Management, AIG tuning and catalyst regeneration. CoaLogix has regenerated more cubic meters
of catalyst than anyone in the world.
Conco Systems Inc
Booth 430
Providing absolutely the best tube cleaning products and services, Conco stands as the world leader in condenser related products and services for the power generation industry. Our Total Condenser Performance lineup of services, including condenser tube cleaning, leak detection and eddy current testing can help ensure your condenser remains efficient and reliable during its operating cycle.
Continental Field Machining/VR-TESCO LLC
Booth 447
CFM/VR-TESCO, LLC Formerly known as Continental Field Machining is a premier, renowned company in the power generation industry that has provided On-site Machining and Specialty Welding for over 30 years. The company operates under a new logo and has been re-structured under the original founder/president, planners and supervisors; we employ a full time crew of union millwrights and pipefitters. As we begin each new project, we pledge that the quality, safety and on-time performance we deliver will always be a cut above our competitors.
Conval, Inc
Booth 437
CSA INC
Booth 440
CSA offers its laser scanning technology, PanoMap, which allows capture of an as-built representation of a plant in a very accurate, photographic-quality 3D format. PanoMap is a very powerful, easy-to-use tool used extensively in nuclear and fossil industries. It allows for interference verification, equipment removal simulation and other analysis done within the scans (no need to build a complete 3D model). PanoMap offers simple, clear communication between the owner/operator and design and construction groups. PanoMap can be easily integrated with any CAD systems as well as other databases. CSA offers software and services that provide complete turn-key solutions to the customer.
CTI Power - Chicago Tube & Iron
Booth 320
CTI Power, a division of Chicago Tube & Iron, is a manufacturer of replacement boiler components including superheaters, reheaters, economizers, panels and generating tubes. We also have engineering and redesign capabilities in our new state-of-the-art facility near Charlotte, NC.
Custom Valve
Booth 338
Custom Valve is a service driven company that has a focus on providing industry leading valve services to our existing and new customers. Industries we serve range from steel producing, paper producing, power generation, chemical and refining.
Davis Pickering & Co. Inc.
Booth 453
Davis Pickering was established in 1937 and is an Industrial and Power Generation Electrical Contractor in the Ohio Valley . We perform work at various AEP locations as well as long term relationships with companies including DuPont, Mon Power and multiple chemical and polymer facilities. We have developed a world class safety program both historically and presently as well as cutting edge Project Managment processes.
Day & Zimmermann
Booth 220
Day & Zimmermann's Engineering, Construction and Maintenance (ECM) group is one of the nation's leading providers of total lifecycle plant solutions for the power, process and industrial markets.
Dayton Precision Services
Booth 240/242
Since 1992, Dayton Precision Services has taken great pride in our ability to provide excellent customer service and quality trained technicians who consider safety to be of the utmost importance. We challenge ourselves to look outside the box for newer areas of opportunity to better serve our customers. We strive to be the one source for all your products, parts and services needs, 24 hours a day, 7 days a week. We offer field machining, heat treating, safety valve and line valve services.
Diamond Power
Booth 435
Diamond Power International, Inc. is a globally acknowledged market leader in boiler cleaning and ash handling. DPII provides innovative technologies for power generation, pulp & paper and industrial boiler designs proven to solve the most difficult plant challenges.
DOW Water & Process Solutions
Booth 152
Dow Water & Process Solutions is global leader in the manufacturing of enabling water treatment compents. DW&PS has a full range of RO/NF membranes, ion exchange resin, UF and EDI componets that allow our OEM partners to deliver the highest quality water treatment equipment.
DXP Enterprises RA Mueller & Precision Industries
Booth 411/413
DXP is a Fortune 500 industrial supply company. DXP RA Mueller specializes in Goulds, Viking, Chemineer and John Crane. Precision Industries is a leading provider of MRO, safety and mill supplies.
Emerson Process Management
Booth 612
Rosemount and Rosemount Analytical offer high quality sensors and analyzers to the Power Industry. Rosemount's Pressure Transmitter is unmatched in the industry or measurement and reliability; this innovation is applied across the entire product offerings of Temperature, Flow and Level Measurements. Rosemount Analytical's In-Situ Oxygen Probe is the industry leader offering rugged design for reduced maintenance; with other analytical measurements available for gas analyzers, gas chromatographs, liquid analyzers, and wet chemistry analyzers.
Enerfab Inc
Booth 419
Engart Global Dust Extraction Technology
Booth 441
Equipment & Controls
Booth 600/602/604
With over 60 years of service in the Western Pennsylvania, Ohio, West Virginia and bordering territories, we understand the unique demands of our customers. We draw on our internal as well as Emerson Process Management resources to help you make the best of your valves, regulators, instrumentation and process management systems.
Ericson Mfg. Company
Booth 200/299
The Ericson Manufacturing Company is a manufacturer of temporary power and lighting systems for use during shutdowns and construction. Since 1918, power gen professionals through out North America have been choosing Ericson products due to our safety features and reliability. Stop by our booth to learn how our portable power distribution equipment can reduce both shutdown duration and risk of accident. Energize, Illuminate, Protect and Connect with Ericson Mfg. Co.
EvapTech
Booth 341
FCX Performance
Booth 356/455
Process valving, instrumentation, wlectric motor operation service.
Fibrex Corporation
Booth 521
Flowserve Corp
Booth 347
Flowserve is the recognized world leader in supplying pumps, valves and seals automation and services to the power, oil, gas, chemical and other industries. With more than 15,000 employees in more than 50 countries, we combine our global reach with a local presence.
Foster Wheeler
Booth 402
Foster Wheeler offers a full range of steam generator equipment, aftermarket products and services to the power, industrial, and waste-to-energy sectors. Our global manufacturing and engineering network can deliver cutting-edge products and expertise, quickly and cost competitively with best-in-class quality. Established in 1891, our experience comes from over a century of designing, servicing, and continually improving steam generating equipment.
Frenzelit Expansion Joints
Booth 142
Frenzelit is a 125+ year old company which developed the non-metallic Flue Duct Expansion Joint concept in 1966. Located in Lexington, North Carolina, Frenzelit is the world leader in Expansion Joints specializing in non-metallic varieties, but also a major supplier of metallic Expansion Joints. Frenzelit prides itself on problem solving trouble areas in order to extend Expansion Joint life. Frenzelit has experience in solving Expansion Joint problems on troublesome FGD and SCR applications. Frenzelit is the largest manufacturer and installer (turnkey) of Expansion Joints in the world. Often, when Frenzelit manufactures and then installs (using union or non-union laborers), extended warranties are offered which give customers both long term satisfaction and protection. Frenzelit via extended warranties, 'puts it money where its mouth is' and takes the responsibility.
Fuel Tech, Inc.
Booth 256
Furmanite America
Booth 318
Since 1929 Furmanite has been the company you can count on to keep your facilities and assets up and running at peak efficiency. Providing service from over 70 locations on six continents, Furmanite is the single most authoritative source for your global industrial service needs. Furmanite is considered by many to be the worldwide industry leader in services and products to support end-to-end maintenance turnarounds, outages and capital construction projects.
Furnace Mineral Products
Booth 610
Recognized global leaders in high temperature ceramic coating protection.
GE Water & Bently Nevada
Booth 238
Water Solutions and Condition Monitoring
Gilson Engineering Sales/Type K Damper Drives
Booth 154
Manufacturers Representatives for Process Instrumentation and Damper Drives
Group DKG
Booth 531
GSB Process
Booth 219/221
GSE Systems, Inc.
Booth 319
GSE Systems is your preferred provider of power plant simulator and training solutions. Proven experience in 500+ applications including 16 AEP projects from 180 to 1300 MW units, from Mountaineer to Turk and Dresden CCGT to D. C. Cook NPP. GSE's high fidelity modeling software assures effective simulation of steam generators, BETs and all plant systems. Uses include operator training, 3D simulation visualizations, dynamic pre-commissioning testing of controls, process control strategies, and other engineering evaluations.
H&S Tool, Inc.
Booth 218
H&S Tool is the OEM of portable tube and pipe machining equipment. ID mount boiler tube equipment and OD mount pipe cutting and beveling tools. Flange facing, sawing and tube rolling. Available for RENTAL and sales 24 hour customer service.
HACH Company
Booth 608
For over 60 years, Hach Company has been developing innovative solutions for water quality analysis. Manufactured and distributed worldwide, Hach systems are designed to simplify analysis by offering easy to maintain on-line instrumentation, accurate portable and bench-top laboratory equipment, high-quality prepared reagents, complete easy-to-follow methods, comprehensive test kits and life-time technical support. You can trust Hach to address your unique needs for water applications throughout the entire power generation process including influent water, condensate, boiler feed water, cooling water and wastewater. Whatever your water analysis challenge, Hach offers the broadest range of test parameters in the industry.
Hamon Research-Cottrell
Booth 351
Hamon Corporation through its subsidiaries, Hamon Research-Cottrell, Hamon Custodis and Thermal Transfer Corporation continue to focus on serving the needs of the utility industry with over 100 years of experience in air pollution control industry. Electrostatic Precipitators (new, rebuild and repair), Fabric Filters, U²A, Dry Scrubbers, Chimneys, Stacks and Multi Pollutant ReACT™.
Harsco Infrastructure
Booth 714
Harsco Infrastructure specializes in offering a complete range of access equipment and related turnkey services to the power industry including a complete range of system scaffolding (QES) and tube and clamp (Tubelox). Harsco Infrastructure has decades of experience servicing and managing scaffolding related maintenance contracts and alliances with some of the largest utilities in North America.
Hersh Packing
Booth 140
Hersh was founded in 1958 by V.R.Hershberger and still a family owned business. We pride ourselves in premier customer service and product / apllication knowledge. Very experianced staff with up to 35 years of service in the industry
Hi Tech Testing Service Inc.
Booth 504
Hi Tech Testing Service Inc. is a full service inspection and testing company. Hi Tech brings together the most advanced technology available with qualified, trained and certified personnel to solve the toughest industry problems. Our service lines include:
Advanced NDE Phased Array, ToFD, Robotic Acquisition Devices (RAD), Basic NDE RT, MT, PT, UT, VT, Engineering, Metallurgical Evaluation, Tubular Testing EC, IRIS, RFT and Acoustic Pulse Reflectometry.
At Hi Tech Our mission is to be the premier total solutions provider of Non-Destructive Examination, Inspection and Engineering Services. We strive to serve our clients at the highest level of accountability, security, integrity and visibility for the management of all project engagements. We are committed to achieving superior quality through teamwork, cooperation, technology and continuous improvement.
High Temperature Technologies / IsoMembrane
Booth 128/130
HTT is the exclusive North American provider of ISOMEMBRANE, a proven solution to dead air space and ductwork expansion joint leakage.
HIlti, Inc
Booth 454
Hilti is a world-leading manufacturer and supplier of quality, innovative and specialized tools and fastening systems for the professional user. Based in Tulsa, Okla., Hilti North America employs approximately 3,000 highly skilled employees in the United States and Canada. Hilti Group worldwide employs approximately 21,000 people in more than 120 countries. Hilti expertise covers the areas of gas and powder-actuated fastening, drilling and demolition, diamond coring and cutting, measuring, firestopping, screw fastening, adhesive and mechanical anchoring, and strut and hanger systems. More company information is available at www.us.hilti.com.
Hitachi
Booth 315
A leading supplier of equipment and services for Power Generation Markets including Thermal, Nuclear, and Hydro facilities. Products include advanced Pulverized Coal Boilers, HRSGs, Steam, Gas and Hydro Turbines and Generators, Substation Equipment and AQCS for new plants and retrofit applications. We offer services including operation and plant assessment, engineering studies, performance optimization, emissions improvement, equipment replacement, upgrades and spare parts.
Horn Industrial Services Companies
Booth 552
Horn Industrial Services is the Parent company of Titan Contracting, Titan Fabricators, National Steel Erection. We are one of the leading full service contracting and fabricating companies in the Power Industry. Our Services include New Construction, Existing Plant Modifications and Repair and Maintenance. You can learn more about our companies by visiting our website at www.hornindustrialservices.com.
Our Specialties include Power and Process Piping, Balance of Plant Disciplines, Turbine and HRSG Installations, Tank Fabrication (Shop and Field Installations), Existing Plant Modifications/Upgrades, Environmental Retrofit and AQCS installations and Maintenance. We are committed to Safety, Quality, Rapid Response, Project Controls, Superior Site Management, and a National Workforce.
Hose Master LLC
Booth 716
Hose Master is the leading manufacturer of flexible corrugated and stripwound metal hose, metal bellows and expansion joints for the power industry, offering engineered solutions and support for your most critical applications.
Metal hose and expansion joint solutions designed and manufactured by Hose Master are known for quality, safety, and value. Products designed and manufactured using our proprietary technology offer the lowest total ownership cost and are backed by 24-hour service and advanced quality systems and certifications. For more information, please visit www.hosemaster.com.
Howden
Booth 118
Howden is a world calss supplier of fans, both axial and centrifugal, air heaters, and compressors. We have offices and manufacturing facilities around the world. Specifically we have a manufacturing facility in New Philadelphia, OH, an 80,000 sq/ft repair facility in Canton, MI and engineering offices outside of Buffalo,NY, Columbia, SC and Raleigh, NC. Howden has supplied AEP with some 38 axial fans of 7,000 HP and greater.
HRI Inc
Booth 343
Hydro Dyne Inc
Booth 624
Hydro Dyne designs, engineers, manufacturers and services Heat Transfer Equipment for the Power Generation Industry including: Feedwater Heaters, Evaporators, Reboilers, Oil Coolers, Turbine Coolers, Glycol Heaters, Pressure Vessels, Custom Heat Exchangers and Condenser Retubing.
HydroAire, Inc.
Booth 206
Illinois Water Technologies
Booth 354
Illinois Water Technologies is a privately owned company committed to excellence in meeting the needs of our customers. Our pride in service and workmanship is shared by all our employees. Our fully skilled staff of degreed field service engineers will partner with you to successfully complete any project. From the time our engineers leave our plant they are equipped with the ability and authority to do what needs to be done to achieve maximum outcome for our customers.
Illinois Water is one of the largest independent service providers in the United States. We understand the needs of our customers and are committed to consistently exceed their expectations. Keeping our customers up and running is our priority and we apply whatever resources necessary to keep them on line. Our services include supervision of installation, startup, trouble shooting, equipment tuning, post startup service, and consulting as required. These services are provided on a per diem or contract basis and are marketed to OEM, sales agents, and end-user customers. As an independent service organization, we are more flexible and responsive and will work independently or partner with your in-house service and engineering departments to get the job done right. Our teams are available 24 hours a day seven days a week and are there when you call. Our total focus is to serve the customer’s needs and meet all special requirements when they need us not just when it is convenient. At Illinois Water Technologies, Inc. our motto is “Service is Everything!”
Independence Excavating
Booth 203
Industrial Analytics Corporation
Booth 501
IAC has been involved in power plant chemistry for over 21 years. Unique and user friendly water quality instrumentation is produced at our facility here in the US that monitor critical chemistries found in power plant water and steam cycles.
Industrial Contractors Inc
Booth 303/305
Industrial Contractors, Inc., headquarted in Evansville, Indiana, delivers safe, quality construction on time for a fair price.
From large industrial and power generation facilities, to hospitals and corporate offices, Industrial Contractors is capable of handling all project phases, from design through start-up and delivery. As a self-performing general, mechanical, and electrical contractor, we are experienced in everything from site/civil footings and foundations, to the installation of roofing systems, as well as integral building systems.
Industrial Info Resources inc.
Booth 614
Industrial Info Resources (IIR) is the leading provider of global market intelligence specializing in the industrial process, heavy manufacturing and energy markets. IIR’s quality-assurance philosophy, the Living Forward Reporting Principle™, ensures that clients receive continually-updated information on plant locations and related process equipment, project spending opportunities, unit maintenance activities and market forecasts. IIR's intelligence is delivered through our online database tools, daily industry news, executive briefings, and high resolution wall maps
Inland Industial Services Group LLC
Booth 310
Inland has combined the best proven technological capabilities and services with a focused business plan approach to provide comprehensive industrial maintenance and cleaning solutions to customers across North America. Services offered include: Automated Boiler and Air Heater Wash, Hydroblasting, Precision Explosives Cleaning, Vacuum Services, Chemical Cleaning, and Hydro-excavation.
Inpro/Seal
Booth 251
Since inventing the original bearing isolator in 1977, Inpro/Seal has become the clear industry-leader in permanent bearing protection for rotating equipment. Today our products include the latest generation bearing isolator, the VBXX-D, the Air-Mizer non-contacting shaft seal and CDR/MGS shaft grounding technologies. You’ll find our unique product lines installed on a variety of rotating equipment across multiple industries. Our technology increases the reliability of your applications and delivers real cost savings by improving mean time between repair (MTBR).
Intertek APTECH
Booth 539
Intertek APTECH is a full service Engineering Consulting Company specializing in Asset
Integrity and Life Cycle Management in the energy industry. We assist clients in
managing the condition of their equipment, solving specific component problems, and
increase reliability, focusing on condition assessments, failure analysis, cycling cost
evaluation, and reliability improvement projects.
IVS Group
Booth 401
IVS Group was founded in 1972 and is comprised of 4 separate divisions that encompass a wide range of specialty services contractors. Our clients are a global "Who's Who" of metal, chemical, petrochemical, mining, energy, forestry, glass, plastic, transportation and specialty gas producers. In addition, we provide services to a variety of local, municipal and federal government agencies. Our customers establish and require the highest standards of safety, performance and value. We routinely exceed our customers expectations; that is why we still have our first customer
J.T. Thorpe & Son, Inc.
Booth 248
JANX
Booth 405
JANX is a Nondestructive and Testing Service company that provides a variety of conventional and advanced applications throughout the U.S. with over 20 locations nationwide. JANX is a wholly onwed subsidary of ApplusRTD.
Kanawha Mfg. Co.
Booth 345
Kanawha Manufacturing is a full service fabrication and machining company. We will build to design or reverse engineer from any material. Specializing in boiler tube shields with over 200 dies in stock. Kanawha Manfacturing is ready to meet any and all your outage-related needs.
Kennametal Conforma Clad
Booth 524
Kissick Engineered Products & Services Inc
Booth 700/702/704
An established manufacturers representative covering the Midwest for companies that provide highly engineered equipment for the power and heavy industrial markets. We are proud to be involved with every area of the plant, from the coal yard to the scrubber. All of our personnel are factory trained and knowledgeable of both the products and their applications. In addition, Kissick Engineered Products & Services, Inc. services all the products that they represent in our service center located in Lancaster, Ohio.
KEPS is an established manufacturers’ representative covering the Midwest for companies that provide highly engineered equipment for the power and heavy industrial markets. We are proud to be involved with every area of the plant, from the coal yard to the scrubber. All of our personnel are factory trained and knowledgeable of both the products and their applications. In addition, Kissick Engineered Products & Services, Inc. services all the products that they represent in our service center located in Lancaster, Ohio.
Aquatech International Corporation is a leading supplier of Industrial Water and Wastewater treatment systems. Located is Canonsburg, Pennsylvania Aquatech has provided leadership and performance excellence to the industry since 1981. Aquatech provides a full spectrum of water and wastewater treatment. Whether the feed source is surface waters, sea or a wastewater, Aquatech offers the expertise and experience to purify it to your specific need – cooling tower makeup, boiler feed, recycle-reuse or zero liquid discharge.
Twin City Clarage has been a recognized name in the fan industry since 1874. We provide not only centrifugal and axial flow fans but also mechanical dust collectors and louver dampers. All of our equipment, from the Forced Draft fan to the Induced Draft fan, is designed to meet the unique requirements of large steam generating facilities.
After the engineering work is completed we manufacture the equipment at our facility in Pulaski, Tennessee to ISO 9001 standards.
Vooner FlowGard offers the VTS Series conical port two-stage vacuum pump for condenser air removal while providing greater capacity to assist with hogging or handle upset conditions.
The VG & V4 Series of single-stage vacuum pumps (up to 14,000 ACFM) are available in 316SS for fly ash conveying systems, gypsum dewatering and vacuum deaerators.
Vooner pumps can replace existing CL, 904 and AT Series pumps. Every pump is performance tested to HEI standards in Charlotte, NC.
Hamworthy Peabody Combustion Inc. is a world leader in the development and application of safe and reliable ultra & low NOx combustion solutions. Our portfolio includes; Ultra low emissions gas and oil burner systems, low BTU fuel gas burners, in-line and elbow-style duct burners, start-up and support burners for fluid bed boilers, ignition and flame scanning systems for utility coal burners, coal to gas conversions, gas additions and burner management systems.
Kokosing Construction Company, Inc.
Booth 538
Kokosing is the largest self-performing union contractor in Ohio, one of the largest in the Midwest, and has been on the ENR Top 100 Contractors list since 1994. Proudly, we are an OSHA VPP Star Mobile Workforce Contractor. Capabilities include: Mass Excavation, Heavy Concrete, Structural Steel Erection, Material Handling Systems, Machinery Setting, Underground Utilities, Piping, Deep Foundations, Roadways, Bridges and Marine. Kokosing, a family owned business, celebrated 60 years in the construction industry this year.
Laidig Systems Inc
Booth 606
Layne Christensen Company
Booth 554/556
Layne supports the power industry with services that range from construction services and high capacity water supplies to pump repair, treatment equipment and injection wells.
Lincoln Electric Company
Booth 313
For over 116 years The Lincoln Electric Company has a tradition of providing innovative solutions and technological leadership. We are a global manufacturer and the market leader of the highest quality welding, cutting and joining products. Our enduring passion for the development and application of our technologies allows us to create complete solutions that make our customers more productive and successful. Headquartered in Cleveland, Ohio, Lincoln Electric has 42 manufacturing locations, including operations and joint ventures in 20 countries and a worldwide network of distributors and sales offices covering more than 160 countries. At Lincoln our Welding Technology Center, Research & Development Department and Technical Support Personnel are dedicated to providing solutions and options for a Safe, Productive, and Quality work environment. At Lincoln Electric we find that when customers use our products, processes, and surrounding services, they make a better quality product at a more competitive cost.
Liquidmetal Coatings Solutions, LLC
Booth 446
LISEGA
Booth 712
LISEGA offers your company their 47 years of experience which has lead them to global recognition as the industry leader in the manufacturing of standardized and custom engineered pipe supports. HQ office is in Zeven, Germany with supporting facilities in USA, UK, France, Russia, India, Asia and Australia. You benefit from our investments. Lisega recognizes the importance of pipe supports being at your site on time; therefore, we inventory 10,000 standardized pipe support components and offer you our free LICAD design software. With LICAD you are able to design a hanger in minutes vs. hours, place your order and have it expedited upon request. If you require our assistance simply provide us with your information and we will design your LISEGA standardized LICAD hangers for free. Do you require engineering services for new supports, re-evaluation or reverse engineering of old supports, product training or assistance in field hot and cold walk downs? Don't worry, Lisega Inc in Kodak, TN offers you the expertise of 30 staff engineers available when you need them. Our expertise provides our customers with the confidence they require to meet their deadline. In fact, LISEGA was awarded the support packages for the last 5 coal fired power plants built in the US. Do you need nuclear product assurance? LISEGA has received both the ASME NPT Stamp and ASME NS Certification. A little known fact is that LISEGA's unique snubber design is in 70% of the US nuclear power generation fleet. Did you know that the LISEGA snubber design has the highest rate of reliability worldwide? One US nuclear power plant, Hope Creek Generation Station, has a homogenous population of LISEGA snubbers and the NRC granted them relief from mandatory operability test through ASME Code Case OMN 15. ASME Code Case OMN 15 reduces test frequency to every 3rd outage. This provides the owner/operator with a significant cost savings, confidence of reliability and no product degradation. If you are looking for a supplier that will partner with you to reduce cost, maintain product quality, provide value added benefits with on time delivery talk to us about our "Interactive Partnership Program". You too will gain the confidence you need to maintain your position as a leader in your industry. Lisega is dedicated and believes in taking care of it's employees and it's customers, they are our true assets. We invite you to "Experience the Difference".
Look Technologies, LLC
Booth 213
Look Technologies is a supplier of remote visual inspection and loose parts retrieval services and equipment. Our state-of-the-art equipment, deep applications knowledge and years of experience, provide a safe, cost effective alternative to disassembling equipment for visual inspection or retrieval of foreign material. Our customer’s applications are our #1 priority, so we are available 24/7 on-call to deliver unsurpassed service, whether you need equipment or someone to perform an inspection for you.
LumaSense Technologies
Booth 246
LumaSense Technologies is a global leader in providing temperature and gas sensing solutions to industrial, energy, medical and clean technology markets. We design and manufacture sensors for end-user and original equipment manufacturers (OEMs) applications. LumaSense has proven expertise in developing state of the art infrared and fiber optic temperature sensors, radiometric thermal imagers and gas analyzers. A common theme in our sensors is the use of infrared (IR) light to provide robust, accurate sensors for demanding environments, applications and customers.
Magneco/Metrel, Inc.
Booth 243
Magneco/Metrel manufactures colloidal silica sol-gel bonded refractories developed especially for power and boiler applications. A few benefits include quick installation, rapid dry out, and excellent physical properties of the refractory. Magneco/Metrel’s refractory materials can be installed by methods of casting, pumping, and shotcreting. This joint free technology produces a significant energy savings for the customer. Specialty shapes are also available in a wide range of shapes and applications.
Marietta Silos, LLC
Booth 449
Marietta Silos is the nation-wide leader of concrete silo construction. Since 1916, Marietta Silos has responded to the needs of the American people through safe, affordable, innovative and quality construction techniques. Marietta Silos is also the largest silo repair company in the nation and offers inspections and consulting to keep every concrete silo performing at its best. No matter what silo needs you have, Marietta Silos has the experience and knowledge to help your business succeed.
Mechanical & Ceramic Solutions, Inc.
Booth 314
Mesa Associates, Inc.
Booth 301
Mesa Associates Inc. is a full service engineering, procurement, & construction management firm specializing in power generation projects (Hydro, Fossil, Nuclear & Green). We also offer power delivery services including electrical high-voltage, substations, switchyard, transmission line, & distribution design. Our core disciplines include civil, structural, mechanical, electrical, process, instrumentation, and controls.
Mettler-Toledo Thornton
Booth 106
Milltre Fabrication Inc
Booth 337
Minnotte Mfg Corp
Booth 422
Mistras Group, Inc.
Booth 205/207
MISTRAS Group is a leading "one-source" global provider of technology-enabled asset protection solutions used to evaluate the integrity of critical energy plants and infrastructure to comply with safety and environmental regulations, extend their life, increase productivity, minimize repair cost, manage risk and most importantly, help avoid catastrophic disaster. The blending of our traditional and advanced NDT (non-destructive testing) technologies and inspection services allows utilities to optimize their inspection dollars with reliable, repeatable and accurate results.
MPW Industrial Services
Booth 148
MPW Industrial Services is a leading provider of technology-based services to industrial, manufacturing and process facilities in the United States and Canada. With headquarters in Hebron, Ohio, MPW has over 39 years of experience rapidly responding to customer needs from our network of more than 40 offices. MPW is the health and safety leader among industrial service providers. Our "Commitment to Safety" ensures that our job sites are safe and healthy. MPW's proactive, comprehensive health and safety process is based on integrated management systems and results in continuous improvement.
MRC (McJunkin Red Man Corporation)
Booth 525/527
MRC is the largest global distributor of pipe, valves and fittings (PVF) and related products and services to the energy industry based on sales and the leading PVF distributor serving this industry across each of the upstream, midstream and downstream markets. MRC operates from more than 250 branches world-wide.
Nalco Company
Booth 120
National Heat Exchange
Booth 308
NeuCo, Inc.
Booth 530
NeuCo, Inc. is the leading provider of optimization software solutions that help electric power producers reduce emissions and improve production availability, reliability and efficiency. NeuCo's closed-loop boiler optimization solutions streamline generating asset combustion and boiler cleaning processes to reduce NOx and GHG emissions, minimize forced outages due to tube ruptures, improve boiler efficiency and heat rate, and reduce SCR reagent consumption. The company's advisory optimization solutions detect and help determine the cause, criticality and remediation of equipment health, heat loss and capacity issues.
Nickel Systems
Booth 417
North American Svc Group NAIS
Booth 622
NWL
Booth 416
Orbital Tool Technologies
Booth 516
Orbital Tool Technologies performs field machining services on turbine and auxiliary related equipment such as valves, rotors, boiler feed pumps, pulverizers just to name a few. In addition, OTT performs in shop turbine valve disassembly, inspection and repair. We maintain a complete 50,000 square foot machine shop with the latest in CNC lathes and mills and reverse engineering equipment for the manufacturing of after- market turbine parts.
OTP Industrial Solutions
Booth 503
OTP Industrial Solutions is a regional distributor founded in 1963 in Columbus now with offices located in OH, WV, KY, IN, MI, and TX. Product segments we support include pumps, electrical, mechanical power transmission, fluid power and repair services. OTP specializes in having access to a broad array of products while also providing a high level of technical expertise in support of the product lines we represent.
P&RO Solutions Inc
Booth 211
Pall Corporation
Booth 302
Pall Corporation is a worldwide provider of filtration, separation, and purification solutions to the power generation industry. Utilizing a diverse portfolio of technologies, Pall can help improve fluid quality and increase profitability by optimizing the performance of plant equipment and processes. With its advanced separation science and high quality manufacturing, Pall is the perfect partner to work with in addressing challenges requiring anything from the supply of filter elements to fully integrated systems.
PECO-FGC
Booth 312
PIC Group Inc
Booth 344
PIC Group, Inc. is a global power generation service provider.
Our expert staff and proven processes maximize plant production, increase revenue and ensure the safety of on-site employees. From installation and start-up to operations and outages, PIC offers a complete portfolio of services to support any or every stage of your project's lifecycle.
Pingel Exchanger Service, Inc
Booth 201
Pioneer Pipe Inc.
Booth 146
Celebrating its 30th Anniversary in 2011, Pioneer is a full-service construction, maintenance and fabrication company that has been providing services to American Electric Power for over 25 years. We offer a broad range of services including general, mechanical and electrical construction, pipe fabrication and installation, steel fabrication and erection, modular fabrication and assembly, plant maintenance and plumbing and heating. We annually employ over 500 people across the Midwest and operate three fabrication facilities in Marietta, Ohio where we maintain in excess of 150,000 square feet of fabrication space under roof. Our quality certifications include ASME Stamps N-NA-NPT-NS, ASME and National Board Stamps S-U-PP-R-NB, ISO 9001:2008 Certifications, and AISC Steel Fabricator and Erector Certifications.
Pipe-Valves Inc
Booth 547
Pipe-Valves, Inc. is a wholesale distributor specializing in PVF, Actuation, Steam, & Controls with a value added focus. We have served the power generation industry, AEP specifically, for 40 years. Our Technical Support staff works with power plants on many energy savings and safety related solutions year after year. Please contact us at (614) 294-4971 or (800) 467-7122.
Plastocor, Inc.
Booth 150
Plymouth Tube Company
Booth 513/515
PME Babbitt Bearings
Booth 522
Portable Solutions Group, Inc.
Booth 532/Trailer 3
Power & Industrial Services Corp
Booth 217
Precision Pump & Valve Service
Booth 227/229
Precision has been providing “unheard of” service since 1956. Whether we are selling you a new pump or valve, or doing field or shop repairs on your existing equipment, Precision is the easiest contractor you will ever work with. We keep it safe and we get the job done right and ahead of schedule. Just some of our specialty services include repair of pumps, line valves, control valves, safety valves, actuators, as well as field machining and discharge stack inspections. Our two Consolidated “GREEN TAG CENTER” locations, Precision Pump and Valve Service, Inc. in Charleston, WV and Precision Services, Inc. in Louisville, KY are strategically located to serve the majority of the AEP power generating stations.
Pro-Seal Service Group
Booth 252
Pro-Seal is a supplier of world class products and services for pumping, sealing, lubrication, and spraying systems.
Process Controls
Booth 102/104
Process Controls Corporation has been an integral Partner to the Power Industry for over Forty years with offices in Cleveland, Cincinnati, Indianapolis and Louisville. Representing leading Process Equipment and Control manufactures to the industry. Featuring Solutions from Gardner Denver Nash, General Electric Powerwave, Mettler Toledo Process, Analytics and others.
Gardner Denver Nash has been supplying efficient reliable vacuum systems to the electric power industry worldwide for more than 100 years. These vacuum systems can improve power station heat rates and provide economical solutions for environmental requirements.
Typical applications include-Condenser Exhausting ,Geothermal Gas Removal, Condenser Initial Evacuation (Hogging), Water Box Priming, Fly Ash Conveying, Flue Gas Desulfurization, Turbine Gland Exhausting ,Vacuum Deaeration
General Electric Powerwave acoustic cleaning systems can significantly improve the cleaning of air pollution control equipment, heat transfer surfaces, material handling and storage equipment, and areas of production where particulate buildup occurs. As an alternative to sootblowers and sootblower cleaning, acoustic cleaners are air-operated devices that emit low frequency, high-energy sound waves. The sound waves create vibrations powerful enough to break apart and dislodge heavy concentrations of particulate on surfaces, but gentle enough to not harm the surface. Once the material has been dislodged, gravity and/or gas flow removes it.
Process Pump and Seal
Booth 249
Proco Products Inc
Booth 523
ProEnergy Services
Booth 544
ProEnergy Services is an integrated service provider that delivers cost-effective, safe and reliable services to the global energy industry. The company has U.S. offices in Sedalia, MO; Houston, TX; Tulsa, OK and Fort Collins, CO; and international locations in Argentina, Mexico, Venezuela, Brazil, Panama, Pakistan and Ghana.
PSC Industrial Outsourcing, LP
Booth 520
PSC solves its clients toughest environmental and industrial services challenges with the industry's most qualified people, state-of-the-art technologies and customized service programs. We provide the safest, most reliable, fully compliant environmental and industrial services solutions, bringing confidence to our clients, every day.
Pullman
Booth 549
Pullman collaborates with clients to improve infrastructure by combining our award-winning specialty construction, repair and maintenance services with our proprietary technologies to provide innovative solutions for demanding engineering and construction challenges.
R-S Matco Inc
Booth 406
R-S MATCO has one of the largest inventories of boiler tubing in the industry specializing in both common and hard to find grades and sizes. Provides mill direct orders from all major domestic and international tube mills.
RCE Heat Exchangers,LLC
Booth 404
Creative Solutions for the Heat Transfer Industry, RCE is owned and operated by Mike Earl and Bob Strobel along with key personnel adding up to 60 years combined experience to handle all of your heat exchanger needs in the power,chemical,pharmaceutical,steel and various other industries.RCE is a full servce company.Engineering,Repair/Rebuild and Manufacturing capabilities
Ready Technologies
Booth 349
Ready provides expertise in a range engineering control such as its CoalFusion™ fully automated blending system that optimizes the fuel you send to your power plant. Blend from an unlimited number of coal yard feeders to an unlimited number of boiler blend specifications while minimizing the cost of your fuel. With advanced process control algorithms, CoalFusion™ increases your plant profitability by delivering the right fuel blend at the right time all the time.
Reynolds, Inc.
Booth 335
Reynolds, Inc., a provider of water/wastewater construction and maintenance services, from source water acquisition, treatment and distribution through waste water collection, treatment and disposal.
River Consulting
Booth 116
River Consulting is a leading mid-major A/E to the energy industry, delivering multidiscipline engineering, project management and balance of plant solutions for major capital projects and facility and process expansions. Our disciplines include civil, structural, mechanical, chemical, process and piping, electrical and control systems and marine structures. River Consulting's experience spans 30 years with Registered Professional Engineers and Structural Engineers in 41 states including all 11 states with AEP facilities.
RMF Nooter/Nooter Eriksen
Booth 300/399
RMF Nooter is multi-crafted with Boilermakers, Pipefitters, Electricians and Millwrights/Ironworkers. We are quality and schedule driven with strong QA/QC programs. We carry the A, S, PP, R and U stamps. Our Safety department has won several awards and our EMR has always been well below 1. We do repair and maintenance for precipitators, ductwork, stacks, burner systems, combustion systems, scrubbers, storage tanks, furnaces and power plant outages. We do demolition of furnaces, boilers and pressure vessels. We do welding of all types of materials.
Nooter/Eriksen, the world's leading independent supplier of Natural Circulation Heat Recovery Steam Generators behind gas turbines is a single source supplier of custom designed heat recovery systems. Nooter/Eriksen's annual sales volume includes HRSGs for combined cycle power plants whose output exceeds 8 MW.
Nooter/Eriksen Aftermarket Service Department can offer complete turn-key services including design, fabrication and installation of replacement components as well.
Robinson Fans Inc
Booth 409
Robinson Fans manufactures the highest quality and most reliable industrial fans for industries worldwide. We specialize in building custom-engineered and custom-designed fans to meet customers’ exacting needs.
Rocky Mountain Industrial Services LLC
Booth 108
Rotating Equipment Repair
Booth 545
RPS Composites
Booth 202
Rumford Industrial Group Inc
Booth 244
Safeguard Technology
Booth 535
SAS Global Corp.
Booth 124/Trailer 6
Lower Mill DP and Motor AMPS with the latest in Coal Processing Technology from SAS Global Corporation. SAS Patented Pulverizer and Burner Technology are the first step in a Boiler Optimization Program. Balance Fuel Pipes, Reduce Nox, lower LOI, reduce slagging, and lower SCR costs. 100% Guarantee.
Sauereisen, Inc.
Booth 144
Sauereisen, Inc. is a 112 year old, Pittsburgh-based Company and a world leading manufacturer of specialty cements and corrosion-resistant materials of construction.
Sauereisen manufactures sealants, corrosion barriers and substrate repair materials for protection and restoration.
Scheck Industries
Booth 353
Scheck Industries is a national mechical contractor providing prime mechanical services, boiler installation / maintenance, process instrumentation calibration / installation and pipe / skid modular fabrication services.
Sentry Equipment Corp.
Booth 424/426
Sentry Equipment Corp designs, manufactures and services systems and equipment used to sample gases, liquids, slurries and bulk solids; enabling safe, simple and repeatable samples for power
generation and process industries worldwide. Our combined steam and water products and brands - Sentry, AquatiPro, Waters Equipment - make Sentry Equipment Corp a worldwide leader in power sampling technology and products.
Service Pump & Supply
Booth 209
Sherwin-Williams
Booth 500
The Sherwin Williams Company is proud to offer the most complete line of high-performance paints, coatings, linings, sundry items and resinous flooring materials in the industry. These products are supported by the largest number of field technical personnel and the most extensive distribution network in the industry, providing you, our valued customer, with the most complete source for the materials and expertise necessary to maintain and protect your capital assets in compliance with applicable government mandates.
SICK Maihak, Inc.
Booth 710
Siemens Water Technologies
Booth 412/414
Siemens Water Technologies works closely with customers to optimize their water and wastewater treatment systems, using industry experts and the largest portfolio of services and innovative products available; including intake systems to boiler feedwater, condensate polishing, and cooling water treatment. Our over 90 service branches and hundreds of mobile trailers provide the support to keep our Power customers online. We offer solutions which help customers achieve the highest ROI through improved operational efficiencies
Sky Climber Access Solutions, LLC
Booth 245
SmartBurn, LLC
Booth 510
Yantai Longyuan Power Technology Co., Ltd. is engaged in research, development, manufacturing and implementation of coal-fired boiler technologies that reduce operating costs and emissions. Plasma Ignition and Combustion Stabilizing (PICS) technology has been installed in more than 500 coal-fired boilers to eliminate startup and support fuel and improve turndown. A subsidiary of China Guodian, one of the five major Chinese power generation companies, Yantai Longyuan works with SmartBurn, LLC in the United States market.
Southern Environmental, Inc.
Booth 451
Southern Environmental serves the power market by providing particulate control solutions that address the growing demands of this regulatory environment. SEI’s cost effective solutions include ESP and Baghouse retrofits, rebuilds and conversions.
SPSI
Booth 241
As a specialized fabricator of process, power and nuclear piping systems, SPSI provides the highest levels of quality, integrity and service throughout the industries we serve. It is our
enduring mission to be the Company of choice for our Customers, our Associates and our
Suppliers. We have an impressive record of providing innovative solutions which continues
through significant investments in leading-edge technologies, dedication to superior quality and
a commitment to the on-going training and welfare of our staff.
SSOE Group
Booth 309
SSOE ranks 12th among the nation's largest engineering and architecture firms (BD+C, 2010) with 23 offices worldwide. We provide comprehensive services to commercial and industrial clients in traditional and emerging markets and have multiple LEED Accredited Professionals on staff. Our experience spans more than 60 years with projects in more than 30 countries and were recently named one of the fastest-growing firms by Inc. Magazine (2010).
STEAG
Booth 235
Stock Equipment Company
Booth 340
Stone Mountain Access Systems, Inc.
Booth 724
With Over 60 years of Scaffold Industry experience Stone Mountain Access has the knowledge to provide the best, safest and most innovative solutions to your Fixed or suspended access needs.
Our sales team has the hands-on experience that enables them to work through the most complex access challenges our mechanics and rigging crews are trained to be the safest in the industry. Our service team is trained to comply with or exceed all industry and OSHA standards. The mechanics at Stone Mountain Access are certified by Hi-Lo Climbers, Sky Climber, Tractel and Power Climber.
Customer service is critical and everyone at Stone Mountain Access believes that our customers deserve the best we can give them every time, no exceptions.
Stress Engineering Services
Booth 304/306
Stress Engineering Services helps define risk and management options by integrating inspection, surveillance monitoring, testing and predictive analysis in an assessment-based approach using the new API-579/ASME-FFS standard.
StructSure Scaffold/Instant Upright
Booth 718/720/722
StructSure Scaffold is the exclusive distributor for an innovative scaffold manufactured by Instant Upright, out of Ireland. If you're looking to save 2-3 days in your boiler, Structsure Scaffold and Instant Upright is the product you need to check out.
Superheat FGH Services/MTI Power Services
Booth 512/514
Superheat FGH Services, Inc. is the world leader in on-site heat treatment and temperature control systems and services. Superheat FGH specializes in successful execution of large plant turnarounds, new plant construction, fabrication and advanced nuclear “mega-projects". Superheat's advanced wireless technology provides superior safety, security, performance and the most comprehensive quality control package available in the industry.
MTI Power Services provides skilled labor and field tested products for on-site, specialty welding and machining. Projects often involve critical cutting and orbital machine welding for pipe repair and replacement. MTI Power offers the best personnel in the business and claims a 100% track record in field service projects. MTI’s legendary “unstoppable” split frames now pair with the equally tough Solar Orbital Systems for welding.
Swagelok
Booth 506/508
Swagelok Company is a provider of fluid system solutions including products and assemblies for the power, oil & gas, petrochemical, semiconductor, and many other industries. Our manufacturing, research, technical support, and distribution facilties support a global network of more than 200 authorized sales and service centers in 57 countries.
Swan Analytical USA
Booth 452
Swan Analytical Instruments is a leading manufacturer of high quality on-line analytical instruments for water analysis in such applications as high purity water, steam, condensate, cooling water, potable water, and effluent. Our primary markets include power plants, drinking water plants, semiconductor facilities, and pharmaceutical processes.
Taggart Global LLC
Booth 239
Tank Connection
Booth 708
Only one Company offers the complete performance package in dry bulk and liquid storage applications. We are the industry leader in bolted, field-weld, shop-weld, hybrid storage tanks and integrated storage systems.
Our in-house services consist of consulting, engineering design, specification development, prompt equipment quotes and field installation services. TCA tanks are designed and constructed to meet AWWA, API, ASME and other stringent specified codes. Get Connected with the Engineers’ first choice in storage!
Team Industrial Services
Booth 518/Trailer 4
Team is the largest specialized industrial services company in North America. With more than 100 U.S. and international locations, Team is rapidly growing its global footprint across a complete range of industries. Team’s integrated services include leak repair, hot tap, field machining, technical bolting, valve repair, field heat treating, NDE/NDT inspection, emissions control and much more. The experts at Team can be on site within hours. And, Team stays on the job until it’s complete, 24/7/365.
Techinomics Inc
Booth 706
Techinomics manufactures high-efficiency coal pulverizer replacement parts for the coal-fired utility industry, cement industry and lime kilns. Products include our patented rotating throat and ledge cover for vertical spindle mill pulverizers and stationary throats. Our patented rotating throat-ledge cover system is covered by a 15-year wear breakage limited warranty. This is the only such warranty in the industry. Techinomics has designed and installed rotating throat systems that are in use in plants throughout the world.
TesTex
Booth 400/499
Established in 1987 with a clear mission to provide innovative products and services to the Non-Destructive Testing industry, we focus on Electromagnetic and Ultrasonic Devices for the inspection of Boilers, Condensers, Heat Exchangers, Pipelines, Storage Tanks and Pressure Vessels. Our products, services and technologies are being applied on a Worldwide basis though our seven Domestic and eight International offices. We continue to provide innovative products through our research and development efforts as well as joint projects with the Electric Power Research Institute (EPRI).
Thermo Scientific
Booth 236
Thielsch Engineering
Booth 537
Providing condition assessment, metallurigical evaluation and nondestructive examination within the utility industry.
TLT-Babcock, Inc
Booth 336
Supplier of axial and centrifugal fans, fan rebuild services and parts
Townley Eng & Mfg Co, Iinc
Booth 502
Manufacturer of Slurry knife gate valves, Slurry hose, Rubber expansion joints, FGD absorber pumps, Absorber nozzles, Foundry parts for bottom ash, Submersible slurry pumps for Coal and limestone washdown sumps, tailing ponds and Bottom Ash sumps, Rubber and urethane lined pipe and chutes, Cyclones, underflow hose, tubs, ball mill chutes, Water isolation valve for intake and cooling water butterfly valves
Triple 5 Industries
Booth 408
Triple 5 is a power industry leader in design and manufacture of on-line and portable acoustic monitoring equipment. On-line Acoustic Monitoring Systems (AMS) can detect power boiler, HRSG and feedwater heater tube leaks. Triple 5's 24/7 Surveillance service assists with analysis of acoustic data for on-line systems. Portable equipment, such as the 50FDC, can detect air, steam, gas and vacuum leaks, valve leaks, faulty steam traps, transformer defects and partial discharge.
TRIVACO
Booth 511
Tyco Flow Control
Booth 505
United Conveyor Corp/Lathrop-Trotter
Booth 334/433
United Dynamics Corporation
Booth 136/138
Alliance Team: United Dynamics "AT" Corporation, Neundorfer Precip Knowledge, and Storm Technologies Inc have been in the power industry for decades. The Alliance program allows our assets to be viewed from a holistic approach. Together our team can provide solutions in conjunction on proper combustion practices, improved boiler equipment inspections, and back end particulate control.
United Rentals Industrial Division
Booth 534/536
United Rentals Industrial Division is a provider of Industrial and Construction rental equipment with an emphasis on Power Plant turnarounds and outages. Hoists, Rigging, Welding...
Varo Engineers, Inc.
Booth 126
Varo Engineers, Inc. is a privately held consulting engineering firm based in Dublin (Columbus), Ohio. Since 1948 Varo has provided engineering and design services for material handling systems to the power generation, coal mining and other bulk handling industries.
Veolia Environmental Services
Booth 434/436
Veolia Environmental Services delivers the industry's most comprehensive array of services with a focus on your business goals, making us a powerful resource to help you keep your plant operating at peak performance.
Veolia Water Solutions & Technologies
Booth 438
Veolia Water Solutions & Technologies (VWS) is the technical subsidiary of Veolia Water and the world leader in water treatment. A specialist in engineering and turnkey design/build projects, VWS also offers a wide range of technological solutions for the power market for fossils fuel and nuclear-powered facilities that includes zero liquid discharge, zero liquid blowdown and water treatment chemicals.
Victaulic Inc
Booth 317
The Victaulic pipe joining system is the ideal choice for the Power Industry because it offers the
combined advantages of design versatility, highly reliable operation, and fast installation.
Victaulic systems have been installed in hundreds of power generation facilities worldwide. With solutions for utility and process applications for coal-fired, simple and combined gas-fired generation, cogeneration, hydroelectric and nuclear plants, Victaulic will help you increase productivity, compress schedules and improve safety on your next project.
Visionary Industial Insulation
Booth 204
Waltron LLC
Booth 215
A water chemistry company started in 1903 by chemists who introduced drinking water chlorination to a range of clients before the first city-wide chlorination system in the US was installed. They have been at the forefront of many technical innovations such as boiler water treatment, desalination plant chemical treatment, ultraviolet drinking water purifiers, oil pollution monitor and management of nuclear water chemistry on a commercial ship. A market leader for power generation with world wide sales and distribution.
Wear Concepts
Booth 122
WeldTech Services Corp
Booth 450
WeldTech is a specialty welding and mechanical repair company that provides a strategic approach to complex mechanical integrity issues, providing customer needs-based solutions. WeldTech provides strong project management and site supervision, a vast network of experienced union welders and craftsmen, specialty tooling and welding processes (including automatic weld metal overlay and orbital pipe welding) to implement repairs that are safety, schedule, quality and budget critical. Visit our website for more details at www.weldtechservices.com
Western Reserve Water Systems Inc
Booth 403
Whertec Inc.
Booth 316
Williams Metals & Welding Alloys, Inc
Booth 445
Williams Metals is a multi-location distributor of non-ferrous metals and welding filler metals, servicing the power generation and distribution industries.
We stock and process aluminum and copper bus bar and bus pipe for switchgear, transformer, and substation applications, along with copper and aluminum strip for
line pole hardware. Welding filler metals are available in copper alloys, aluminum, stainless, nickel, silver, and cobalt.
Winsafe
Booth 212
Winsafe offers a wide range of products for the power generation industry. Winsafe is the innovator of the Boiler Maintenance Work Platform that has been proven to save hundreds of thousands of dollars worth of lost generating time that traditional ground up scaffolding would otherwise require. We also offer a wide variety of easy to use, boiler maintenance scaffold products in order to provide time saving access to specific parts of the boiler. Our SuperMod suspended scaffold systems provide standard access solutions for a wide variety of access requirements at height. We also offer free custom engineering of our platforms and outrigger systems to accommodate more complex access challenges such as the penstocks of Hydro electric dams. Winsafe also offers Fall Protection pedestal and davit systems for working on transformers or within confined spaces.
Yokogawa Corp of America
Booth 507/509
Yokogawa Corporation of America is the North American division of Yokogawa Electric Corporation, a global leader in the manufacture and supply of instrumentation, process control and automation solutions. Headquartered in
Sugar Land, Texas, Yokogawa Corporation of America offers a variety of products such as analyzers, flowmeters, transmitters, controllers, recorders, data acquisition products, measuring instruments, distributed control systems and more. For more information about Yokogawa, please visit our website www.yokogawa.com/us.
Zachry Holdings, Inc.
Booth 439
Zachry Holdings, Inc. is a privately held business engaged primarily in the engineering, construction and maintenance of large industrial projects and facilities in the United States. Based in San Antonio, Texas Zachary participates in a wide range of the energy sector including traditional and renewable power, petrochemical, refining, forest products and nuclear. Zachry has offices throughout the U.S. and safely employs more than 15,000 craft and professional staff.
